FusionTHP Panels Capabilities
Amerimax’s FusionTHP Panels are the next evolution of fiberglass reinforced polyester (FRP) panels. The exclusive chemical formulation of FusionTHP Panels yields a superior panel that outperforms other available fiberglass panels. FusionTHP Panels’ high performance is created with the most technologically advanced equipment and highest quality raw materials.
Below are the capabilities of FusionTHP Panels:
Finished Panel
1. The panel surface shall have a smooth finish. Color shall be uniform throughout the panel surface. The backside of the panel shall be a uniform lauan backer. Lauan imperfections which do not affect functional properties are not cause for rejection and are subject to the specifications of the lauan supplier.
2. Physical properties are detailed in the Physical Properties Table.
3. Dimensions shall be as specified on purchase order. The following are the panel capabilities:
|
Description |
Value |
Tolerance |
|
Thickness |
0.164” |
± 10% |
|
Width |
Up to 9’6” |
± 1/8” |
|
Length |
Up to 39’6” |
± ¼” |
|
Squareness |
- |
± 1/8” every 4’ |
Fabrication
Safety: Always wear protective eye goggles; cover nose and mouth with an air filter mask; cover exposed skin when cutting FusionTHP Panels.
Drilling: Use a high speed drill bit when drilling or hole saw.
Cutting: Use carbide-tipped saw blades.
Painting Preparation: Sanding or roughening of the panel surface is not required to achieve acceptable paint adhesion, but is recommended. Panels must be clean, dry, and free of all oils, dust, and contaminants before paint application. Amerimax recommends that the FRP surface is either primer washed or solvent wiped to remove oils, dust, and contaminants.
Storage Requirements
Keep contents dry. Store panels indoors in a well ventilated and dry location. Exposure to moisture will cause discoloration and lead to poor adhesive bonding.
Purchasing
Panel Size: Up to 9’6” x 39’6”
Minimum Order: 2,000 sq. ft.
Lead Time: 10 days
Skid Quantity: 25 panels