Storage Requirements

Keep contents dry. Store panels indoors in a well ventilated and dry location. Exposure to moisture will cause discoloration and lead to poor adhesive bonding.

Fabrication

Safety: Always wear protective eye goggles; cover nose and mouth with an air filter mask; cover exposed skin when cutting Fusion^THP Panels.

Drilling: Use a high speed drill bit when drilling or hole saw.

Cutting: Use carbide-tipped saw blades.

Painting preparation: Sanding or roughening of the panel surface is not required to achieve acceptable paint adhesion, but is recommended. Panels must be clean, dry, and free of all oils, dust, and contaminants before paint application. Amerimax recommends that the FRP surface is either primer washed or solvent wiped to remove oils, dust, and contaminants.